Aerosoft A333_Update auf Version 1.0.1.0

  • Komplett neuer Download nötig, analog zu den kleinen Bussen.


    Version 1.0.1.0 - full new build:

    • Bug Fix: EFB folder path full unicode support to fix issue with special characters
    • Bug Fix: Dive issue when speed increased fixed
    • Bug Fix: Several issues with ECAM MEMO logic fixed
    • Bug Fix: Small fix for GSmini display
    • Bug Fix: OVHD reading light on CPT side could have stayed on partly when turning it on/off several times
    • Bug Fix: After setting altimeter to STD it might have happened that former QNH still was set on according ND altimeter while STD displayed on BARO selector
    • Bug Fix: If upper ECAM is switched off its content is correctly displayed on lower ECAM. But in this situation some drawings were scaled incorrect...
    • Bug Fix: Fix for park brk desync issue in CFD
    • Improvement: A/THR response adapted for better turbulence handling
    • Improvement: Added logic for FLEX setting
    • Improvement: Several small adjustments in ND like heading bug visible with preselected HDG on FCU
    • Improvement: Added logic for right MCDU to control right ND PLAN mode
    • Improvement: Several adjustments with STEP ALTS implementation
    • Improvement: Several speed flags and protection speeds and logics improved
    • Improvement: Multiple fixes in holdings line drawing
    • Improvement: COMs frequency spacing changed from 25kHz to now 8.33kHz
    • Offizieller Beitrag

    Sind die Busse jetzt mit V5 kompatibel?

    Viele Grüße

    Gunter


    3.0viking01.gif


    ASUS ROG Strix B550, 32 GB DDR4-3000 Corsair Vengeance, AMD Ryzen 9 5900x, RTX 3080, 10 GB, Thrustmaster Hotas Warthog Stick, Honecomb Bravo, Crosswind Rudder Pedals

    Es gib Menschen, die sich immer angegriffen wähnen, wenn jemand eine Meinung ausspricht.

    (Christian Morgenstern)

  • Derzeit wohl noch nicht, liegt an TrueGlass, das vom Aerosoft Partner TFDi Design erstellt wurde und an verschiedene Hersteller lizensiert wird. TrueGlass ist aber noch nicht P3Dv5 kompatibel. Im P3Dv5 Aerosoft Airbus Forum schreibt Mathijs Kok, dass mit einer P3Dv5 Version frühestens anfang nächster Woche zu rechnen ist. Hier der Beitrag im Aerosoft Forum: Our busses in P3D V5, collection topic

    Lieben Gruß

    Christian


    Flugsimulator: MSFS Motherboard: ASRock B560 CPU: i7-11700K GPU: Asus RTX 4080 TUF RAM: 64 GB Kingston Fury DDR4 @3200Mhz SSD: Samsung 980 1TB & Samsung 980 Pro 1TB
    Bahrometrix

    Für eine anspruchsvolle Flugsimulation

    www.bahrometrix.de

  • In V5 wird man mit Airlinern zurzeit auch keine rechte Freude haben, da es den Winds Aloft Bug noch gibt.

    Ist schon gefährlich wenn man in FL350 oder mehr beim passieren von Wetterstationen den Bodenwind eingespielt bekommt, anstatt den Höhenwind.

  • Der P3D in Version 5 mit seinem Hotfix 1 ist dann tatsächlich ein ziemlich fehlerbehafteter Flugsimulator. Für mich verdichtet sich immer mehr der Eindruck das die Version 5 zu schnell und vorzeitig veröffentlicht wurde. Liegt möglicherweise am Druck den der FS2020 auf die LM Entwickler ausübt.

    Lieben Gruß

    Christian


    Flugsimulator: MSFS Motherboard: ASRock B560 CPU: i7-11700K GPU: Asus RTX 4080 TUF RAM: 64 GB Kingston Fury DDR4 @3200Mhz SSD: Samsung 980 1TB & Samsung 980 Pro 1TB
    Bahrometrix

    Für eine anspruchsvolle Flugsimulation

    www.bahrometrix.de

    • Offizieller Beitrag

    Das kann man doch irgendwo abstellen, meine ich.

    Viele Grüße

    Gunter


    3.0viking01.gif


    ASUS ROG Strix B550, 32 GB DDR4-3000 Corsair Vengeance, AMD Ryzen 9 5900x, RTX 3080, 10 GB, Thrustmaster Hotas Warthog Stick, Honecomb Bravo, Crosswind Rudder Pedals

    Es gib Menschen, die sich immer angegriffen wähnen, wenn jemand eine Meinung ausspricht.

    (Christian Morgenstern)

  • Neues Update für V4.5 HF3


    May 25th


    The P3d V4 A330 has been updated to version 1.0,2.0 via the standard updater tool.


    HISTORY


    1.0.2.0 Experimental update

    Bug Fix:Condition for displaying "OUTR TK XFRD" message was not reset after landing and therefore could be incorrectly displayed on succeeding turn around flight.

    Bug Fix: Condition for automatic takeoff trim was not reset after landing and therefore didn't work on succeeding turn around flight.

    Bug Fix: Condition for LOGO lights corrected.

    Bug Fix: Descent Preparation CL - Autobrakes: Were set before descent instead of at qpp. 10.500 feet.

    Bug Fix: Altitude waypoints were shown as constraints.

    Bug Fix: Engine howling during startup prevented.

    Bug Fix: Corrected UTC/TIME display.

    Bug Fix: NON-Precision APPR corrected.


    Improvement: Multiple changes for holdings.

    Improvement: Multiple changes to PFD.

    Improvement: Better support for ActiveSky v5 winds.

    Improvement: Corrected text in flows.

    Improvement: Drawing of "CHECK HDG" message added.

    Improvement: ViewFocus changed.

    Improvement: Description in Groundservices for GSX changed to "GSX PUSHBACK".



    Auch für V5 HF1 wurde ein Update veröffentlicht, dass so ziemlich die selben Verbesserungen enthält wie die V4.5 Version.


    Mit Hinweis zu V5 Fehlern:


    May 20th


    The first V5 version (1.0.2.0) has just been released. This is a free update for all current users.


    A few quick notes. While doing this new version we ran into some serious issues with V5, they are all pretty well documented in the the Prepar3D forums and as far as we know all are being looked at or worked on. But they can affect this product seriously. For example high altitude weather is totally whacky with shifting winds and temperatures normal for Pluto, not earth. Also things like CTD's when changing views (certainly on AMD GPU's). Lastly TrueGlass that we use for the rain effects is a beta version and might have issues.


    So all in all, this is the best we can do right now. If you find problems we STRONGLY advise you to look in the P3D forums first to see if it is not something related to the sim, rather then the add-on.

  • Hmm...

    Mein Updater zeigt folgendes:


    Nur reguläre Aktualisierungen werden angezeigt


    Prepar3D 4.x (4.5.14.34698) gefunden: (D:\Prepar 3D v4.5\)

    Produktname: Aerosoft A330 Professional for Prepar3D v4.x

    Add-on Pfad: D:\Prepar 3D v4.5\Aerosoft A330 Professional


    Installierte Version: 1.0.1.0

    Für dieses Produkt sind keine Aktualisierungen verfügbar!


    Ich glaube da liegt ein Irrtum vor, in meinem Konto steht:


    Datei(en):


    Version: 1.0.1.0 (P3DV4) --> demnach bin ich aktuell


    Version: 1.0.2.0 (P3DV5) --> scheint diese Version nur für P3Dv5 zu sein.

  • The P3d V4 A330 has been updated to version 1.0,2.0 via the standard updater tool.

    Version: 1.0.2.0 (P3DV5) --> scheint diese Version nur für P3Dv5 zu sein.

    Ich hab im Konto nachgesehen, demnach stimmt die Aussage nicht. 1.0.2.0 ist nur für P3Dv5.

    Oder was verstehe ich jetzt falsch?

  • Jaja, da sind wir uns einig. Allerdings ist das bei mir eben nicht im Updater. Aber vielleicht kommt es ja noch.

    Obwohl, ich befürchte nicht. Der Bus hat vor 2 Wochen ein Update erhalten, sprich man musste ihn neu installieren. Das ist meistens so bei den Bussen. Und jetzt haut wieder was nicht hin.

  • Hast Du im Updater die "Experimental Updates" (oder wie das auch immer dort genannt wird) eingeschaltet?

    Mit herzlichen Grüßen vom Westzipfel der Republik

    Jens


    :flieger: mit: MSFS, P3D4, P3D5 sowie X-Plane11 und 12

  • Yes, hab ich natürlich. Hab schon den Support angeschrieben.